Maths - 3D Clifford Algebra - Arithmetic

This is my attempt at calculating the inner and outer product from first principles.

Inner and Outer products

In addition to the geometric product there are two more types of multiplication used in Geometric Algebra. These extend and generalise the 'dot' and 'cross' products used in 3D vector algebra.

Inner product by a vector reduces the grade of a multivector. It is related to the dot product.

Outer product by a vector increases the grade of a multivector. It is related to the cross product.

Outer product

We want the outer product to be an extension of the vector cross product:

x = Ay * Bz - By * Az
y = Az * Bx - Bz * Ax
z = Ax * By - Bx * Ay

This gives a bivector which is mutually perpendicular to the vectors being multiplied. But how do we extend this so that we can multiply non-vectors? There are different definitions for the outer product so we need to be careful, if you use other websites or books you may find that they use different definitions. Here is the full 3D Outer multiplication table:

a^b	b.e	b.e1	b.e2	b.e3	b.e12	b.e31	b.e23	b.e123
a.e	e	e1	e2	e3	e12	e31	e23	e123
a.e1	e1	0	e12	-e31	0	0	e123	0
a.e2	e2	-e12	0	e23	0	e123	0	0
a.e3	e3	e31	-e23	0	e123	0	0	0
a.e12	e12	0	0	e123	0	0	0	0
a.e31	e31	0	e123	0	0	0	0	0
a.e23	e23	e123	0	0	0	0	0	0
a.e123	e123	0	0	0	0	0	0	0

This has the following nice properties:

• It is a superset of the vector cross product.
• ^ product with a vector increases the grade by one.
• even grades commute, odd grades anticommute.
• It is associative.
• It is linear - multiplication by a scalar does not change the grade.
• It is the same as G(0,0,3) as derived here.

It is relatively easy to derive using the following rules:

• When two independent base vectors are outer multiplied, for instance e₁^ e₂, we cant further simplify the result so we just leave the result as: e₁^ e₂.
• When two parallel base vectors are outer multiplied, for instance e₁^ e₁ the result is zero, so if the same base occurs 2 or more times in any term then the whole term is zero.

By starting with the vector cross product terms we can derive the remaining terms in the table as follows:

e1 ^ e1 = 0 e2 ^ e2 = 0 e3 ^ e3 = 0	because we have chosen to let vectors square to zero as with vector cross product.
e1 ^ e2 = e12 e2 ^ e1 = -e12 e2 ^ e3 = e23 e3 ^ e2 = -e23 e3 ^ e1 = e31 e1 ^ e3 = -e31	As with vector cross product, vectors anticommute, we can also derive this because the vectors will cancel out when a general vector is squared: (a e1 + b e2+ c e3)2 =0.
e1 ^ e12 =0 e1 ^ e31 = 0 e1 ^ e23 = e123 e1 ^ e123 = 0 e2 ^ e12 = 0 e2 ^ e31 = -e2 e13 = e123 e2 ^ e23 = 0 e2 ^ e123 = 0 e3 ^ e12 = -e132= e123 e3 ^ e31 = 0 e3 ^ e23 = 0 e3 ^ e123 = 0	these are derived from the results above using these rules.
e12 ^ e1 = 0 e31 ^ e1 = 0 e23 ^ e1 = -e213= e123 e123 ^ e1 = 0 e12 ^ e2 = 0 e31 ^ e2 = -e132 = e123 e23 ^ e2 = 0 e123 ^ e2 =0 e12 ^ e3 = e123 e31 ^ e3 = 0 e23 ^ e3 = 0 e123 ^ e3 = 0	these are derived from the results above using these rules.
e12 ^ e12 = 0 e12 ^ e31 = 0 e12 ^ e23 =0 e12 ^ e123 = 0 e31 ^ e12 = 0 e31 ^ e31 = 0 e31 ^ e23 = 0 e31 ^ e123 = 0 e23 ^ e12 = 0 e23 ^ e31 = 0 e23 ^ e23 = 0 e23 ^ e123 = 0	these are derived from the results above using these rules.
e123 ^ e12 = 0 e123 ^ e31 = 0 e123 ^ e23 = 0 e123 ^ e123 = 0 e123 e312= -e123 e321= 0

Inner product.

We want the outer product to be an extension of the vector dot product:

A • B = Ax * Bx + Ay * By + Az * Bz

This gives a scalar which depends on the angle between the vectors being multiplied, it is zero if the vectors are perpendicular and zero if the vectors are parallel. But how do we extend this so that we can multiply non-vectors? There are different definitions for the inner product so we need to be careful, if you use other websites or books you may find that they use different definitions. Here we will use the 'semi-commutative inner product' which has the following 3D Inner multiplication table:

a•b	b.e	b.e1	b.e2	b.e3	b.e12	b.e31	b.e23	b.e123
a.e	0	0	0	0	0	0	0	0
a.e1	0	e	0	0	e2	-e3	0	e23
a.e2	0	0	e	0	-e1	0	e3	e31
a.e3	0	0	0	e	0	e1	-e2	e12
a.e12	0	-e2	e1	0	-e	0	0	-e3
a.e31	0	e3	0	-e1	0	-e	0	-e2
a.e23	0	0	-e3	e2	0	0	-e	-e1
a.e123	0	e23	e31	e12	-e3	-e2	-e1	-e

This has the following nice properties:

• It is a superset of the vector dot product.
• • product with a vector decreases the grade by one.
• odd grades commute, even grades anticommute.
• It is not associative.

By starting with the vector cross product terms we can derive the remaining terms in the table as follows:

e1 • e1 = e e2 • e2 = e e2 • e2 = e	because we have chosen to let vectors square to zero as with vector cross product.
e1 • e2 = 0 e2 • e1 = 0 e2 • e3 = 0 e3 • e2 = 0 e3 • e1 = 0 e1 • e3 = 0	As with vector cross product vectors anticommute, we can also derive this because the vectors will cancel out when a general vector is squared: (a e1 + b e2+ c e3)2 =a2 + b2+ c2
e1 • e12 =e2 e1 • e31 = -e1 • e13 = -e3 e1 • e23 = 0 e1 • e123 = e23 e2 • e12 = -e2 • e21 = -e1 e2 • e31 = 0 e2 • e23 = e3 e2 • e123 = -e2 • e213 = e31 e3 • e12 = 0 e3 • e31 = e1 e3 • e23 = -e3 • e32 = -e2 e3 • e123 =e3 • e312 = e12	The result of inner multiplying a vector base by a bivector base depends on weather they contain a common base, if they do, make the bases adjacent then the common base cancels out: e1 • e12 =e2 if they don't the result is zero: e1•(e2^e3)=0 Same thing for inner multiplying by a tri-vector.
e12 • e1 = -e21 • e1 = -e2 e31 • e1 = e3 e23 • e1 = 0 e123 • e1 =e231 • e1 = e23 e12 • e2 = e1 e31 • e2 = 0 e23 • e2 = -e32 • e2 = -e3 e123 • e2 = -e132 • e2 = -e13 =e31 e12 • e3 = 0 e31 • e3 = -e13 • e3 = -e1 e23 • e3 = e2 e123 • e3 = e12
e12 • e12 = -e21 • e12 = -e e12 • e31 = 0 e12 • e23 =0 e12 • e123 = -e3 e31 • e12 = 0 e31 • e31 = -e e31 • e23 = 0 e31 • e123 = -e2 e23 • e12 = 0 e23 • e31 = 0 e23 • e23 = -e e23 • e123 = -e1	When multiplying two bivectors, if the bivectors have the same bases then we need to reverse one of them to get adjacent terms together, then we can cancel out terms, so we always get -e. If the bivectors are different the result will always be zero. When multiplying a bivector by a trivector we reverse as necesarily to cancel out two of the terms to leave a vector.
e123 • e12 = -e3 e123 • e31 = -e2 e123 • e23 = -e1 e123 • e123 = -e

Identities

The following identities relate the inner, outer and geometric products of vectors (grade one multivector) :

a•b = ½ (ab + ba)	This is symmetrical (a•b = b•a)
a^b = ½ (ab - ba)	This is anti-symmetrical (a^b = - b^a)
a * b = a•b + a^b

Where:

• a and b are vectors
• K_k a multivector of grade k

We can extend this to the multipication of a vector by a general multivector as follows:

a•K = ½ (aK + (-1)^k+1Ka)

a^K = ½ (aK + (-1)^k Ka)

a*K = a•K + a^K

Where k is the grade of K. The (-1)^k factor alternates the sign as follows:

grade k	(-1)k	(-1)k+1	a•K = ½ (aK + (-1)k+1Ka)	a^K = ½ (aK + (-1)k Ka)
0 (scalar)	1	-1	a•K = ½ (aK - Ka) = 0	a^K = ½ (aK + Ka) = aK
1 (vector)	-1	1	a•K = ½ (aK + Ka) = aK	a^K = ½ (aK - Ka) = 0
2 (bivector)	1	-1	a•K = ½ (aK - Ka) = 0	a^K = ½ (aK + Ka) = aK
3 (trivector)	-1	1	a•K = ½ (aK + Ka) = aK	a^K = ½ (aK - Ka) = 0

However we have not yet created a general expression for any grade of multivector, for instance a bivector times a bivector, which does not follow the above pattern.

A_<2> ^ B_<2> = 0

Can anyone help with a more general expression.

Other identities for •

(a^b)•(c^d) = a•(b•(c^d))= b•(c^d)•a

from Hestenes (New Foundations of Classical Mechanics) pp47 exercise 2.1

The inner product is not associative: a•(b•c) may not equal (a•b)•c